After years of traffic, the timber floorings are losing their radiance. To invigorate them, sanding and also re-opening might be necessary. Here’s how you can sand as well as varnish a wood floor.
Cut the film of paint between the plinth and also the wall surface with a utility blade. Place a small board against the wall surface so as not to harm it. Remove the skirting board with a nail bar or screwdriver against the board. Spread out the plinth at the area of each nail. Number skirting boards as you eliminate them to facilitate reinstallation. Get rid of the nails.
To sand a floor over its whole surface area, make use of a drum sander. Begin using # 80 paper. Beginning with completion of the work surface, press the sander towards the floor battens to around 6 “from the wall surface. Elevate the drum while maintaining the sander moving. Return to your starting factor and also begin the next section halfway along the width of the initial area. When the surface area has been completely fined sand, replace the # 80 paper with # 120. Repeat the procedure using # 150 paper to remove the marks left by the previous sanding. It is necessary to operate in a well ventilated space. If required, you could rent some tools or work with professionals. Otherwise, make sure to adhere to the instructions,
Use a border sander, and also the same sanding paper numbers in the order suggested in the previous action, to sand along the wall surface. Scrape hard-to-reach locations, such as radiators, with a paint scrape. At these very same locations, sand manually.
Begin by applying the varnish on the edge of the area utilizing a brush that is suitable for the product made use of. Then make use of an applicator advised by the producer and spread out the varnish over the remainder of the floor. Allow the time suggested by sablage de plancher Montreal .
To finish the work, sand the surface making use of a finishing sander with a fine-grained rough pad.